Table of Contents
Advertisement
SAFETY INFORMATION
WARNINGS:
Only connect the machine to the power source described in the
Important Information Section.
Avoid multi-wiring.
Do not damage , break or make any modifications to the power
cord. Do not place heavy objects on it, pull it hard or bend it
more than necessary. These actions could cause an electric
shock or fire.
Do not plug or unplug the power cord with your hands wet.
Otherwise, an electric shock might occur.
Make sure the wall outlet is near the machine and freely
accessible so that in event of an emergency it can be unplugged
easily.
Do not remove any covers or screws other than those specified
in this manual. Some parts of the machine are at a high voltage
and could give you an electric shock. When the machine needs
to be checked, adjusted, or repaired, contact your service
representative.
Do not take apart or attempt any modifications to this machine.
There is a risk of fire, electric shock, explosion or loss of sight.
If the machine looks damaged or breaks down, smoke is coming
out, there is a strange smell or anything looks unusual,
immediately turn off the power switch then unplug the power
cord from the wall. Do not continue using the machine in this
condition. Contact your service representative.
If metal, liquid or foreign matter falls into the machine, turn off
the power switch, and unplug the power cord.
Contact your service representative. Do not keep using the
machine with a fault or defect.
Do not put any metal objects or containers holding water
(e.g.vases, flowerpots, glasses) on the machine. If the contents
fall inside the machine, a fire or electric shock could occur.
ii
Advertisement
Table of Contents
Troubleshooting
