Command List - Omron 3G3MX2 Series User Manual

6 Drive Programming Commands
6-3

Command List

Program Control Commands
Command Argument 1
entry
end
call <subroutine>
sub <subroutine>
end sub
goto <label>
on trip goto <label>
if
if
else
endif
6 - 4
Argument 2 Argument 3
<condition>
<condition>
<command set 1>
<command set 2>
Argument 4 Argument 5
goto <label>
then
Drive Programming User's Manual (I580-E2)
Description
Indicates the begin-
ning of the task.
Indicates the end of
the task.
Jumps to <subrou-
tine>.
Indicates the begin-
ning of the subroutine.
Indicates the end of
the subroutine.
Jumps to <label>
unconditionally.
Jumps to <label>
when a trip occurs.
Jumps to <label> when
the condition is met.
Starts the "if" structure.
If <condition> is met, it
executes <command
set 1> right after this
command until the
"else" command, and
goes to the next step
after the "endif".
If <condition> is not
met, it executes <com-
mand set 2> right after
the "else" command
until the "endif" com-
mand, and goes to the
next step after the
"endif".
The command set that
is executed when
<condition> is met.
Starts the commands
when <condition> is
not met.
The command set that
is executed when
<condition> is not met.
Ends the "if" structure.