Fsp-5000-Rps Programming Software; Functional Modules; Ani 0016 A Annunciator Module; Bcm-0000-B Battery Controller Module - Bosch FPA-5000 System Information Manual

150 en | Technical Data
7.4.3

FSP-5000-RPS Programming Software

The following minimum system requirements are defined for the FSP-5000-RPS Programming
Software:
–
–
–
7.5

Functional Modules

The functional modules have the following technical specifications in common:
Permissible operating temperature
Permissible storage temperature
Relative humidity
Housing material and color
Safety standards
Protection class
Alternative technical data is listed for the individual modules.
7.5.1 ANI 0016 A Annunciator Module
Display elements
Input voltage
Maximum current consumption
–
–
Space required (H x W x D)
Weight
Installation of the power supply unit is described in ANI 0016 A Annunciator Module, page 101.
7.5.2 BCM‑0000‑B Battery Controller Module
Input voltage
Current consumption at 23 V DC
–
–
Permissible battery capacities
–
–
Maximum current
–
–
09.2017 | 11.3 | F.01U.028.089
Operating system: Windows 7 (32 bit or 64 bit), Windows 10 (32 bit or 64 bit).
Hard disk: At least 1 GB storage capacity.
RAM: At least 500 MB.
Standby mode (all LEDs off)
In case of alarm (all LEDs on)
Standby operation
Fault
with 2 batteries
with 4 batteries
of the module
to panel rails
-5 °C to 50 °C
-20 °C to 60 °C
Max. 95 % non-condensing
ABS plastic, satin finish, anthracite, RAL 7016
EN 60950
IP 30
16 red LEDs, 16 yellow LEDs
20 V DC to 30 V DC/5 V DC ± 5 %
6 mA
26 mA
approx. 127 x 96 x 60 mm
approx. 206 g
20.4 V to 30 V
25 mA
40 mA
24 to 26 Ah, 36 to 45 Ah
48 to 52 Ah, 72 to 90 Ah
Max. 6 A
Max. 6 A
System Information
Modular Fire Panel
Bosch Sicherheitssysteme GmbH