Remote Keypad - Bosch FPA-5000 System Information Manual

Modular Fire Panel
Signal inputs
Max. length of CAN cable for
system networking
Input voltage
Maximum current consumption
Permissible operating temp.
Permissible storage temperature -20 °C to 70 °C
Space required (H x W x D)
Weight
Installation of the device is described in MPC Panel Controller, page 84.
7.4.2

Remote Keypad

Display element
Operating and display elements
Interfaces
Signal inputs
Permissible length of CAN cable
for system networking
Recommended cable type for
CAN connection
Power supply connections
Input voltage
Maximum power supply line
resistance
Maximum current consumption
Permissible operating
temperature
Permissible storage temperature
Housing material and color
Space required (H x W x D)
Weight
Installation of the device is described in Remote Keypad, page 127.
Bosch Sicherheitssysteme GmbH
IN1/IN2
L
max
and topology
20 V DC to 30 V DC
–
–
-5 °C to 50 °C
190 x 404 x 60 mm
Approx. 2 kg
TFT touch scree, 320 x 240 pixels, 127.5 mm x 170 mm
active area
22 buttons, 1 key switch, 12 LEDs, 1 reboot button
CAN1, CAN2, ETH1, ETH2, USB, RS232
IN1/IN2
L = 1000 m, depending on configuration, cable type
max
and topology
J-Y-ST/Y2 x 2 x 0.8
DC1 (power supply),
DC2 (redundant power supply)
12 V DC to 30 V DC, from FPA‑5000 or FPP‑5000
18 Ω
– Standby mode: 140 mA at 24 V DC
– In case of alarm: 230 mA at 24 V DC
-5 °C to 50 °C
-20 °C to 70 °C
ABS plastic, light gray (similar to RAL 7035)
280 x 340 x 87 mm
approx. 3 kg
System Information
= 1000 m, depending on configuration, cable type
Standby mode: 135 mA at 24 V DC
In case of alarm: 225 mA at 24 V DC
Technical Data | en 149
09.2017 | 11.3 | F.01U.028.089