Programming The Control Panel; Rps Programming Over A Network Using The Dx4020 Ethernet Network Interface Module; Rps Programming Over A Network Using The Its-Dx4020-Ggprs/Gsm Communicator; Rps Programming Using The Dx4010V2 Rs-232/Usb Serial Interface Module - Bosch D9412GV3 Quick Reference Manual

10 en | Programming the Control Panel
3

Programming the Control Panel

You can program the control panel with RPS using a network connection or serial connection.
You can program some paramaters of the control panel with keypad programming.
3.1 RPS Programming over a Network Using the DX4020 Ethernet
Network Interface Module
For additional information, refer to IP Address Programming in the Conettix DX4020 Network
Interface Module Installation Guide (P/N: F01U045288).
3.2 RPS Programming over a Network Using the ITS-DX4020-G
GPRS/GSM Communicator
For additional information, refer to the Conettix ITS-DX4020-G Installation Guide
(P/N: F01U163066).
3.3 RPS Programming Using the DX4010V2 RS-232/USB Serial
Interface Module
For additional information, refer to the DX4020 RS-232/USB Serial Interface Module Installation
Instructions (P/N: F01U083036).
3.4

RPS Programming Using the Keypad Programming

For additional information, refer to the D9412GV3/D7412GV3 Program Entry Guide
(P/N: F01U170807) or the D7212GV3 Program Entry Guide (P/N: F01U170808).
F01U170805 | 01 | 2010.11 Quick Reference Guide
D9412GV3/D7412GV3/D7212GV3
Bosch Security Systems, Inc.