Fpe-5000-Ugm Interface Module - Bosch FPA-5000 System Information Manual

Modular Fire Panel
The technical data can be found in ENO 0000 B Fire Service Interface Module, page 152.
4.9.6 FPE‑5000‑UGM Interface Module
The FPE-5000-UGM Interface Module allows the FPA-5000 Modular Fire Panel or an FPA-5000/
FMR-5000-C network to be connected to a higher-level system such as the UGM or to fire
service devices such as FMF-FAT/FMF-FBF-FAT. The module provides two bi-directional
transmission paths.
The module has two LEDs per transmission path for indicating the status (green =
transmission, yellow = fault), and a key for testing the LEDs.
Figure 4.60: FPE‑5000‑UGM Interface Module
Labeling
SDI 1 + | -
SDO 1 + | -
SDI 2 + | -
SDO 2 + | -
Information on the redundant connection of the module can be found in Redundancy, page 40.
The technical data can be found in FPE‑5000‑UGM Interface Module, page 152.
Bosch Sicherheitssysteme GmbH
Connection
Transmission path 1
Transmission path 2
System Information
Installation | en 109
Data input + | -
Data output + | -
Data input + | -
Data output + | -
09.2017 | 11.3 | F.01U.028.089