Modular Fire Panel
Installation of the power supply unit is described in LSN 1500 A LSN improved Module
1500 mA, page 114.
7.5.11
NZM 0002 A Notification Appliance Zone Module
Operating and display elements
Input voltage
Maximum current consumption
–
–
Maximum output voltage
Maximum output current
–
–
Space required (H x W x D)
Weight
Installation of the power supply unit is described in NZM 0002 A Notification Appliance Zone
Module, page 116.
7.5.12
RMH 0002 A Relay Module for mains voltage
Operating and display elements
Fuses
Input voltage
Feedback current
Feedback voltage
Maximum current consumption
–
Standby operation
–
Both relays tripped
Maximum contact load
Maximum line resistance of feedback lines
Space required (H x W x D)
Weight
Installation of the power supply unit is described in RMH 0002 A Relay Module for Mains
Voltage, page 117.
Bosch Sicherheitssysteme GmbH
Standby mode (both zones)
In case of alarms (both zones)
For supply via panel rail
For external power supply
4 LEDs (2 x red, alarm/2 x yellow, fault)
2 buttons (each on/off)
F1 = T 6.3 A, F2 = T 6.3 A
20 V DC to 30 V DC/5 V DC ± 5 %
max. 8.5 mA per feedback output
max. 30 V DC
10 mA
50 mA
5 A at 120 V/230 V AC or 5 A at 30 V DC
(resistive)
2 x 25 Ω
approx. 127 x 96 x 60 mm
Approx. 135 g
4 LEDs (2 x red, alarm/2 x yellow, fault)
2 buttons (LED test)
20 V DC to 30 V DC/5 V DC ± 5 %
40 mA
65 mA + 500 mA per notification appliance
29.5 V DC
500 mA per notification appliance (in case of
alarm)
3 A per notification appliance (in case of
alarm)
approx. 127 x 96 x 60 mm
Approx. 135 g
System Information
Technical Data | en 155
09.2017 | 11.3 | F.01U.028.089