Bosch FPA-5000 System Information Manual page 37

Modular Fire Panel
–
–
–
Information on installation of the BCM module can be found in BCM‑0000‑B Battery Controller
Module, page 101.
Configuration with One to Four BCM Modules in Wall Mounting Housings
–
–
–
Figure 3.7: Configuration of 1 to 4 BCM modules (wall mounting)
Configuration with One to Four BCM Modules in Frame Installation Housings
–
–
Bosch Sicherheitssysteme GmbH
The batteries connected to the BCM must all be of the same type and have identical
electrical properties.
The cable length at the switch outputs for faults may not exceed 3 meters.
The cables for the switch outputs for faults may only be routed inside the housing.
Up to 2 BCM-0000-B modules on short panel rail
Maximum 2 BCM-0000-B modules at the end of the long panel rail
Each BCM-0000-B module requires one UPS 2416 A Universal Power Supply.
12 V / 24 Ah HCP 0010 A 12 V / 24 Ah
BCM 0000 UPS 2416 A
1. 2.
BCM
+ - + - + - + -
24V 24V 24V 24V
1 2 1 2
MAIN POWER
MAIN POWER
MAIN POWER
MAIN POWER
TROUBLE TROUBLE
BATTERY 1 BATTERY 1
TROUBLE TROUBLE
BATTERY 2
BATTERY 2
TROUBLE
TROUBLE
MAIN BAT1 BAT2 FAULT MAIN BAT1 BAT2 FAULT
S
S
+ - + - + - - - - + + - + - + - - - - +
2
1
UPS 2416 A
12 V / 28 Ah 12 V / 28 Ah
12 V / 28 Ah 12 V / 28 Ah
Up to 2 BCM-0000-B modules on short panel rail
Maximum 2 BCM-0000-B modules at the end of the last long panel rail
12 V / 28 Ah
12 V / 28 Ah
System Information
BCM
+ - + - + - + -
24V 24V
24V 24V
1 2
1 2
MAIN POWER MAIN POWER
MAIN POWER MAIN POWER
TROUBLE TROUBLE
BATTERY 1 BATTERY 1
TROUBLE TROUBLE
BATTERY 2 BATTERY 2
TROUBLE TROUBLE
MAIN BAT1 BAT2 FAULT MAIN BAT1 BAT2 FAULT
S
+ - + - + - - - - + + - + - + - - -
3
4
UPS 2416 A
12 V / 28 Ah
12 V / 28 Ah
09.2017 | 11.3 | F.01U.028.089
Planning | en 37
S
- +