Bosch FPA-5000 System Information Manual page 122

122 en | Installation
Scope of Delivery
–
–
–
–
–
–
–
Can be Extended with:
–
–
–
Notes
–
–
FPP‑5000‑TI Trouble Interface
The FPP-5000-TI module is used in the FPP-5000 External Power Supply Unit with the
BCM-0000-B to transmit faults to the fire panel via the Local Security Network (LSN).
Two independent signal inputs for "battery fault" and "mains current fault" allow a specified
fault indication on the fire panel.
The FPP-5000-TI is connected directly to the LSN bus line and supplied with power via the bus
line.
Figure 4.77: FPP‑5000‑TI Trouble Interface
Labeling
AUX1 - | AUX1 +
LSN1 a1 - | LSN1 b1 +
SHIELD
AUX2 - | AUX2 +
LSN1 a2 - | LSN1 b2 +
AC FAULT - | +
BATT FAULT - | +
09.2017 | 11.3 | F.01U.028.089
PMF 0002 A Power Supply Housing Frame Installation medium
FMH 0000 A Mounting Frame Medium
Power supply bracket, installed
UPS 2416 A Universal Power Supply
PRS-0002-C Panel Rail Short
BCM-0000-B Battery Controller Module
Requisite cable sets
2 x 12 V/45 Ah batteries
FPP‑5000‑TI Trouble Interface or FPP-5000-TI13 LSN Communication Interface
FPO‑5000‑EB Earth Bar
You can find the installation instructions for the FPP-5000 kit at www.boschsecurity.com
by searching for the type designation (document number for installation instructions:
F.01U.005.065).
The installation dimensions are the same as those for the PMF 0004 A (see ).
Connection
Auxiliary power supply, incoming
LSN in
Shield wire
Auxiliary power supply, outgoing
(support points for looping through)
LSN outgoing
Input of mains fault
Input of battery fault
System Information
Modular Fire Panel
Bosch Sicherheitssysteme GmbH