Bosch FPA-5000 System Information Manual page 87

Modular Fire Panel
Notice!
You will find detailed information about the CAN and Ethernet networking of the panels in the
Networking Guide available for download at www.boschsecurity.com.
When connecting to a building management system (BIS) via an OPC server and Ethernet
100BaseTX in multiple building networks, you must clarify with the network administrator
whether
1.
2.
Information about address setting and configuration in the network can be found in section .
Notice!
For detaiIed information about the installation und configuration of the OPC server see the
FSM-5000-OPC-Server manual.
Figure 4.41: MPC, USB and RS232 interfaces
Figure 4.42: MPC connection to BIS via OPC server
Bosch Sicherheitssysteme GmbH
the network is designed for multiple building connections (e. g. there must be no
technical interference due to differences in grounding potential);
the bandwidth of the bus users is sufficient for the network.
USB Device
max. 3 m
OPC
Server
FPA-5000
FPA-1200
Ethernet
100BaseTX
2
1
0
System Information
Installation | en
RS232
max. 3 m
09.2017 | 11.3 | F.01U.028.089
87