Housings For Wall Mounting - Bosch FPA-5000 System Information Manual

16 en | Product Description
No mounting frame is required when using the 482.6 mm installation kits.
Front Doors
The CPH 0006 A, MPH 0010 A and EPH 0012 A housings can be equipped with optional
transparent front doors made of impact-resistant plastic, with a lock on the left or right:
–
–
Scope of Delivery
Housing type
CPH 0006 A
MPH 0010 A
EPH 0012 A
PSF 0002 A
PMF 0004 A
USF 0000 A
The technical data for the frame installation housings can be found in Housings for Frame
Installation, page 146.
2.5

Housings for Wall Mounting

Figure 2.6: Housings for wall mounting
Wall mounting housings are screwed directly onto the wall. This reduces the installation depth
by approx. 9 cm, although the smaller 12 V/28 Ah batteries must be used as a result.
The modular system makes it easy to extend the system.
Housing Designs and Combinations
Two wall mounting housings are available as a base unit:
–
–
These housings can accommodate an MPC Panel Controller with operating and display unit as
the central element.
09.2017 | 11.3 | F.01U.028.089
FDT 0000 A Front Door Transparent, lock right side
FDT 0003 A Front Door Transparent, lock left side
HCP 0006 A (for 6 modules), and
HBC 0010 A (for 10 modules)
Scope of delivery (each x 1)
- Housing, painted sheet steel
- Power supply bracket
- Sheet steel front panel with plastic cover
- Accessories pack with installation material
- Housing, painted sheet steel
- Housing, painted sheet steel
- Housing, painted sheet steel
- Power supply bracket
- Cable set for battery connection
- Housing, painted sheet steel
- Power supply bracket
- Cable set for battery connection
- Housing, painted sheet steel
- Mounting plate
System Information
Modular Fire Panel
Bosch Sicherheitssysteme GmbH