Compaq ProLiant DL580 Setup And Installation Manual page 91

3. Secure the rack mounting bracket using two M6 x 12mm Phillips-head
screws.
Figure 4-11. Back of mounting bracket assembly installed
4. Using the pencil marks, attach the rack mounting bracket assembly to
the front rail of the rack using one M6 x 12mm Phillips-head screw in
the top hole of the bracket. Do not use washers.
IMPORTANT:
I
Place one screw in the top hole of the bracket.
I
The tabs on the front of the rack mounting bracket help to align it with the front of
the rack frame.
Installing the Server 4-21
CZR4-012.eps