D-10 Compaq ProLiant DL580 Server Setup and Installation Guide
PCI Hot Plug LED Status Indicators
LED
Power Status
On
Green
Off
Amber
On
Green
On
Amber
Flashing
Green
On
Amber
Off
Green
On
Amber
Table D-7
OK to Open Slot Status
No
Power is currently applied to the slot. Do NOT open
the slot release lever. The slot is functioning
normally.
No
Power is currently applied to this slot, but the slot
needs ATTENTION for possible problems with the
slot, board, or driver. Do NOT open the slot release
lever. Follow these steps:
1. Through the PCI Hot Plug application, turn
power Off to the slot (the green LED turns Off).
2. Open the slot release lever (the amber LED
turns Off).
3. Remove or replace the board.
4. Connect the cables to the PCI board.
5. Close the slot release lever.
6. Return power to the slot through the
PCI Hot Plug application (the green LED turns
On).
No
Power slot is being turned Off or On, which may
take several minutes. There may be a problem
with the slot, the PCI board, or the driver. DO NOT
open the slot release lever until the green LED is
completely Off.
No
Power to this slot is turned Off, but this slot needs
ATTENTION. There may be a problem with the slot,
board, or driver.
1. Open the slot release lever (the amber LED
turns Off).
2. Remove or replace the board.
3. Connect the cables to the PCI board.
4. Close the slot release lever.
5. Return power to the slot through the
PCI Hot Plug application (the green LED turns
On).
continued