Compaq ProLiant DL580 Setup And Installation Manual page 178

Installing a Hot-Plug Fan
This procedure can be used after the server is powered down or during live
activity. To ensure safety, is recommended that hot-plug fans be replaced
when the server is powered down.
1. Lower the new hot-plug fan into the fan bracket
securely in the hot-plug fan slot on the system board.
2. Finger-tighten the thumbscrew until the fan is secured
Figure C-4. Installing a hot-plug fan
3. Replace the top access panel and power up or continue normal server
operations.
until it is seated


.

2
1
Troubleshooting C-15