Compaq ProLiant DL580 Setup And Installation Manual page 132

IMPORTANT: The text is displayed for only two seconds. If you do not press F10 within
the two seconds, you must start the server again.
d. If a system partition exists, the server powers up to the partition. If
the partition does not exist, the message displayed indicates that no
system partition exists.
Upgrading the System Partition
To upgrade the system partition, use the following procedure:
1. Launch the SmartStart CD as previously described in this chapter.
2. When the main menu appears, select the System Configuration Utility,
then the System Configuration menu, the System Partition option, and
finally the Upgrade System Partition option.
3. Select to the utilities you wish to upgrade. SmartStart copies the new
utilities from the CD to your system partition.
Deleting a System Partition
To delete a partition, use the following procedure:
1. Insert the SmartStart CD in the CD-ROM drive and turn on the server.
2. Select the System Configuration option from the System Configuration
Utility menu.
3. Select the System Partition option and then the Delete a System
Partition option.
The System Configuration Utility then displays the partitions available
for deletion, along with the following commands:
I
Press Space to mark partitions for deletion.
I
Press Esc to cancel the operation.
I
Press Enter to execute the deletion routine.
4. Respond to the confirmation screen to reboot the system.
Copying Files
To copy files, use the following procedure:
1. Insert the SmartStart CD in the CD-ROM drive and turn on the server.
Server Configuration and Utilities 7-9