Compaq ProLiant DL580 Setup And Installation Manual page 167

C-4 Compaq ProLiant DL580 Server Setup and Installation Guide
Question
Question 1: Are any front panel system status
LEDs on?
Question 2: Is the Power On/Standby status LED
green or amber?
Question 3: Is the amber Power On/Standby LED
blinking?
Question 4: Does the server have video?
Question 5: Is the memory/processor status LED
blinking amber?
Table C-1
Diagnosis Steps
Action
If no, go to Table C-2.
If yes, continue to Question 2.
If amber and on, go to Table C-3.
If amber and blinking, continue to Question 3.
If green, continue to Question 4.
If yes, go to Table C-4.
If no, go to Table C-5.
If yes, video is available for diagnosis. Determine the
next action by observing POST progress and error
messages. Refer to "POST Error Messages" in the
Compaq Servers Troubleshooting Guide for a complete
description of each POST error message.
If yes, go to Table C-6.
WARNING: To reduce the risk of electric shock or damage to the equipment:
I
Do not disable the power cord grounding plug. The grounding plug is an
important safety feature.
I
Plug the power cord into a grounded (earthed) electrical outlet that is
easily accessible at all times.
I
Install the power supply before connecting the power cord to the power
supply.
I
Unplug the power cord before removing the power supply from the server.
I
If the system has multiple power supplies, disconnect power from the
system by unplugging all power cords from the power supplies.