Compaq ProLiant DL580 Setup And Installation Manual page 74

4-4 Compaq ProLiant DL580 Server Setup and Installation Guide
CAUTION: Be sure to plug your power cord into a power outlet that is easily
accessible and located as close as possible to the equipment operator. When
you need to disconnect power to the equipment, be sure to unplug the power
cord from the power outlet.
CAUTION: Protect the server from power fluctuations and temporary
interruptions with a regulating uninterruptible power supply (UPS). This device
protects the hardware from damage caused by power surges and voltage spikes
and keeps the system in operation during a power failure.
CAUTION: Rack model Compaq ProLiant servers must always be operated with
the top access panel secured in place. Proper cooling cannot be achieved while
the system unit cover is removed.
IMPORTANT: Because of the 100 to 120 VAC electrical rating of each power supply,
some local electrical authorities may require either one 15-ampere circuit for each power
supply or one 20-ampere circuit for each pair of power supplies.
WARNING: Because this product is very heavy, reduce the risk of
personal injury or damage to the equipment by performing the
following:
37 kg
I
81 lb
I
I
Remove the hot-plug power supplies and hard drives to reduce
the weight of the product before lifting it.
Observe local occupational health and safety requirements and
guidelines for manual material handling.
Get help to lift and stabilize the product during installation or
removal, especially when the product is not fastened to the
rails.