Compaq ProLiant DL580 Setup And Installation Manual page 141

7-18 Compaq ProLiant DL580 Server Setup and Installation Guide
2. Follow the instructions on the screen, until you reach the step to detect
mass storage devices.
3. To skip mass storage device detection, select S for Skip detection.
4. When prompted to specify additional SCSI adapters or array controllers,
select S for Specify Additional Devices.
5. Select Other.
6. When prompted to provide a driver for the new device, insert the
Windows NT SSD, Disk 2 and press Enter.
7. Select the embedded array controller driver for
Microsoft Windows NT 4.0 and press Enter. The Windows NT 4.0
Setup program copies the driver that supports the Compaq Integrated
Smart Array Controller.
8. Select S for Specify Additional Devices.
9. Select IDE CD-ROM (Atapi 1.2)/PCI IDE Controller and press Enter.
10. When prompted to provide a driver for the new device, insert the
Windows NT Server Setup-Disk 3 and press Enter.
11. Continue with the normal operating system installation.