2-16 Compaq ProLiant DL580 Server Setup and Installation Guide
Reinstalling the Memory Board
After securely installing the DIMM modules into the memory board, reinstall
the memory board in the server by performing the following steps:
1. Align the memory board with the upright grooved supports and slide
into place
.
2. Press the board evenly into the memory board slot to make firm contact
with the board.
3. Press the locking latches
into place.
2
Figure 2-11. Installing the memory board
4. Replace the access panel.
5. Reconnect all power cords.
6. Restore power to the server.
down until the lateral release latches snap
1
2