Parameter List; Parameter List (By Number) - Mitsubishi Electric FR-A820-00046 Instruction Manual

Parameter List

5.1 Parameter List
5.1.1

Parameter list (by number)

For simple variable-speed operation of the inverter, the initial value of the parameters may be used as
they are. Set the necessary parameters to meet the load and operational specifications. Parameter set-
ting, change and check can be made from the operation panel and the parameter unit.
NOTES
Simple Simple Simple
between the simple mode and extended mode (initially set to extended mode).
Parameter setting may be restricted in some operating statuses. Use Pr. 77 "Parameter write selec-
tion" to change the setting.
Refer to Appendix A.3 (page A-5) for instruction codes for communication and availability of
parameter clear, all clear, and parameter copy of each parameter.
Pr.
Pr. Name
group
0 G000
Torque boost
1 H400
Maximum frequency
2 H401
Minimum frequency
3 G001
Base frequency
Multi-speed setting (high speed)
4 D301
Simple Simple Simple
Multi-speed setting (middle speed)
5 D302
Simple Simple Simple
Multi-speed setting (low speed)
6 D303
Simple Simple Simple
7 F010
Acceleration time
8 F011
Deceleration time
Electronic thermal O/L relay
H000
9
C103
Rated motor current
10 G100 DC injection brake operation frequency
11 G101 DC injection brake operation time
12 G110 DC injection brake operation voltage
Tab. 5-2: Parameter overview (by number) (1)
5 - 2
indicates simple mode parameters. Use Pr. 160 "User group read selection" to switch
Simple Simple Simple
Simple Simple Simple
Simple Simple Simple
Simple Simple Simple
Simple Simple Simple
Simple Simple Simple
Simple Simple Simple
Simple Simple Simple
Minimum
Setting range setting
increments
0 to 30% 0.1%
0 to 120 Hz 0.01 Hz
0 to 120 Hz 0.01 Hz
0 to 590 Hz 0.01 Hz
0 to 590 Hz 0.01 Hz
0 to 590 Hz 0.01 Hz
0 to 590 Hz 0.01 Hz
0 to 3600 s 0.1 s
0 to 3600 s 0.1 s
0 to 500 A
0.01 A
0 to 3600 A
0.1 A
0 to 120 Hz, 9999 0.01 Hz
0 to 10 s, 8888 0.1 s
0 to 30% 0.1%
Parameters
Initial value
Refer
to page
FM CA
6%
4%
5-688
3%
2%
1%
120 Hz
5-321
60 Hz
0 Hz 5-321
60 Hz 50 Hz 5-690
60 Hz 50 Hz 5-197
30 Hz 5-197
10 Hz 5-197
5 s
5-241
15 s
5 s
5-241
15 s
5-303,
Inverter rated
5-72,
current
5-471
3 Hz 5-701
0.5 s 5-701
4%
5-701
2%
1%