Siemens SIMATIC ET 200SP Manual page 22

Product overview
3.1 Properties
Properties
The SIMATIC ET 200SP motor starter has the following technical properties.
● Switching and protection device for three-phase asynchronous motors and single-phase
AC motors
● Integrated short-circuit and overload protection
● Direct-on-line or reversing start function
Fail-safe motor starters additionally support safety-related disconnection (Safe Torque Off).
The fail-safe variants of the motor starter are therefore suitable for the following uses:
● Safety-related applications up to SIL 3 to EN 61508, PL e/Cat. 4 to EN ISO 13849-1
● Overload protection of motors in hazardous areas
You can find all the functions supported by the SIMATIC ET 200SP motor starter in chapter
"Functions (Page 32)".
The following system functions of the ET 200SP family remain supported:
● I&M data
● Firmware update
● Maintenance
You will find the descriptions of these functions and also rules and regulations for
commissioning in the System Manual of the ET 200SP
(http://support.automation.siemens.com/WW/view/en/58649293).
Accessories
You can order the following accessories separately:
● BaseUnit with width of 30 mm (3RK1908-0AP00-0xx0)
● Labeling strips in various versions:
– 500 units light-gray on a roll (6ES7193-6LR10-0AA0)
– 500 units yellow on a roll (6ES7193-6LR10-0AA0)
– 1000 units light-gray on DIN A4 sheets (6ES7193-6LA10-0AG0)
– 1000 units yellow on DIN A4 sheets (6ES7193-6LA10-0AG0)
● 160 reference identification labels (6ES7193-6LF30-0AW0)
● 3DI/LC module (3RK1908-1AA00-0BP0)
● Fan (3RW4928-8VB00)
● Mechanical bracket for BaseUnit (3RK1908-1EA00-1BP0)
● Cover for an empty BaseUnit (3RK1908-1CA00-0BP0)
● Touch protection cover for infeed bus (3RK1908-1DA00-2BP0)
22
Motor starter (3RK1308-0**00-0CP0)
Manual, 12/2016, A5E34821005002A/RS-AB/002