Siemens SIMATIC ET 200SP Manual page 132

Data sets
A.8 Read/write DS201 device parameter 1
Object Byte.Bit Range of values
No.
[0]: Enable
193 2.3
[1]: Disable
[0]: Non-retentive
80 2.4
[1]: Retentive
81 2.5 See input 1 signal
82 2.6 See input 1 signal
191 2.7 [0]: Enable
[1]: Disable
194 3 [0]: No action
[1]: Trip without restart
[2]: Trip with restart
[3]: Trip end position CW
[4]: Trip end position CCW
[5]: Group warning
[7]: Emergency start (not during ATEX
operation)
[8]: Motor CW
[9]: Motor CCW
[11]: Quick Stop (direction-independent)
[12]: Trip RESET
[13]: Cold start (not during ATEX
operation)
[14]: Quick Stop clockwise
[15]: Quick Stop counter-clockwise
[37]: Operational trip end position CW
[38]: Operational trip end position CCW
195 4 See input 1 - action
[9]: Motor CCW (default for reversing
starters)
196 5 See input 1 - action
[13]: Cold start (default for standard
motor starters)
2 6 - 7 0.3 ... 12 A/10 mA
The maximum current is preset.
15 8 18.75 ... 100 %/3.125 % [6 ... 32]
[0]: Deactivated
16 9 50 ... 400 %/3.125 % [16 ... 128]
[0]: Deactivated
132
Meaning
Group fault diagnostics
Input 1 signal
Input 2 signal
Input 3 signal
Group warning diagnostics
Input 1 action
Input 2 action
Input 3 action
Rated operational current I
The rated operational
current is MLFB-dependent,
and thus also the maximum
setting range.
Lower current limit
Upper current limit
Manual, 12/2016, A5E34821005002A/RS-AB/002
See Chapter ...
Group fault
diagnostics/group warning
diagnostics (Page 64)
Inputs (Page 65)
Inputs (Page 65)
Inputs (Page 65)
Group fault
diagnostics/group warning
diagnostics (Page 64)
Inputs (Page 65)
Inputs (Page 65)
Inputs (Page 65)
Rated operational current
e
(Page 35)
Upper/lower current limit
(Page 55)
Upper/lower current limit
(Page 55)
Motor starter (3RK1308-0**00-0CP0)