Read Ds203 Device Parameter 1 - Siemens SIMATIC ET 200SP Manual

Data sets
A.10 Read DS203 device parameter 1
A.10

Read DS203 device parameter 1

DS203 contains the second part of the incorrect parameter with which the motor starter is
working. The defaults appear in italics in the Value range column.
Object Byte.Bit Range of values
No.
- 0.0 [0]
[0]: 3-phase
3 0.1
[1]: 1-phase
[0]: No
2209 0.2 - 0.3
[1]: Yes
6 0.4 - 0.7 [3]: CLASS 5 (10a)
[0]: CLASS 10
[0]: Trip without restart
5 1.0 - 1.1
[1]: Trip with restart
[2]: Warn only
[0]: Retention of the thermal
4 1.2
motor model on restart
[1]: Deletion of the thermal
motor model on restart
- 1.3 [0]
[0]: Switch substitute value 0
34 1.4
[1]: Retain last value
19 1.5 [0]: Warn
[1]: Tripping
20 1.6 [0]: Warn
[1]: Tripping
- 1.7 [0]
25 2.0 [0]: NC contact
[1]: NO contact
27 2.1 See input 1 level
29 2.2 See input 1 level
[0]: Enable
193 2.3
[1]: Disable
[0]: Non-retentive
80 2.4
[1]: Retentive
81 2.5 See input 1 signal
82 2.6 See input 1 signal
191 2.7 [0]: Enable
[1]: Disable
134
Meaning
Reserved
Load type (only for direct-on-
line starters)
Ex motor
Trip class
Response to overload - TMM
The charge state of the
thermal motor model is
deleted at run-up. In this way,
unintentional early trips can
be prevented if the motor
starter has been switched off
for an extended period.
Reserved
Response to CPU/master
STOP
Response to residual current
detection
Response to asymmetry
Reserved
Input 1 level
Input 2 level
Input 3 level
Group fault diagnostics
Input 1 signal
Input 2 signal
Input 3 signal
Group warning diagnostics
Manual, 12/2016, A5E34821005002A/RS-AB/002
See Chapter ...
-
Load type (Page 36)
Ex motor application (Page 63)
Overload protection (Page 42)
Trip without restart (Page 71)
Trip with restart (Page 71)
Overload protection (Page 42)
-
Response to CPU/master STOP
(Page 64)
Response to residual current
detection (Page 52)
Asymmetry monitoring (Page 61)
-
Inputs (Page 65)
Inputs (Page 65)
Inputs (Page 65)
Group fault diagnostics/group
warning diagnostics (Page 64)
Inputs (Page 65)
Inputs (Page 65)
Inputs (Page 65)
Group fault diagnostics/group
warning diagnostics (Page 64)
Motor starter (3RK1308-0**00-0CP0)