Delta Electronics AFE075A43A User Manual page 79

Password Set
01-03
Pr.01-03 displays
01 when the correct
password is entered
into Pr.01-03.
Correct Pa ssword
Pr.01-03
When co rrect pa ssword
ente re d in to Pr.01-0 2,
Pr.01-03 displays 0 0.
Source of Operation Command
Settings 1: External terminal

For the factory released AFE2000 unit, the digital keypad is not set as the source of operation
command, user can perform operation control via the external terminal or the communication
interface (RS485).

When the PU led on the interface is lightened, the digital keypad can now perform the operation
command. (For optional accessories selection, please refer to Ch 06 Optional Acessories- Digital
keypad section.)
Control Mode Selection
Settings 0：AFE2000 mode
Accel. Time
Settings 0.00~600.00 sec
Decel. Time
Settings 0.00~600.00 sec

Acceleration: (The DC Bus voltage measured at stop – the maximum allowable voltage
setting)/Acceleration Time

Deceleration: (The DC Bus voltage measured at stop – the maximum allowable voltage
setting)/Deceleration Time

The maximum allowable voltage setting of the AFE2000 model.
Chapter 11 Description of Parameter SettingsAFE2000 Series
Pass word Input
01-03
When the correc t password i s en tered
into Pr.01-02 ,Pr.0 1-03 d ispl ays 00.
Pr.01-02
It a llows three wrong pas sword in puts:
1s t time displays " 01" if password is i ncorrect.
2nd tim e displays " 02", if pa ssword is i ncorrect.
3rd time disp lays "Pcode"(bl inkin g)
2: RS-485 serial communication or digital keypad (KPVL-CC01)
1：Regenerate mode
Incorre ct Password
Pr.01-02
The keypad wi ll be locked , when wron g
password i s e ntered for three time s. Ple ase
resta rt the drive and enter the pa ssword agai n.
11-77
Pass word Forgotten
01-03
Enter 9 999 and press ENT ER,
repea t this st ep twice. The
param eter setting s will rese t to
factory setting .
Factory Setting: 0
Factory Setting: 0
Factory Setting: 2
Factory Setting: 2