Delta Electronics AFE075A43A User Manual page 28

Chapter 6 Optional Accessories|AFE2000 Series
Digital Keypad
KPC-CC01
Descriptions to the function key
Key
START OPERATION
1. It is only valid when the source of operation command is from the keypad.
2. The RUN key starts AFE2000 to operate as the function setting and the RUN LED will be ON
3. It can be pressed again and again during stop.
STOP OPERATION (When Stop key is pressed, all operation will stop in all condition.) This key has the
highest priority in all condition.
1. When i STOP command is given, the AFE2000's operation will stop under any condition.
2. The RESET key can be used to reset the drive when faults occur. If the RESET key is not responsing,
OPERATION DIRECTION
ENTER
Press ENTER and go to the next level. If it is the last level then press ENTERnter to execute the
command.
ESC
Press ESC to return to the last page. If there is a sub-menu, press ESC will return to the
previous category.
MENU, press MENU key at any time would return to the main menu.
List of function:
KPC-CE01does not support function 4~112.
KPC-CC01does not support function 4, 5 and 7.
1.
2.
3.
4.
1. "up", "down", "left" and "right".
2. When setting the number, use "left" and "right" key to increase and decrease the value.
3. When selecting the options, use "up" and "down" key to move the selection.
Function key (This function will be available soon.)
Frame size
check MENU Fault Records search for the most recent fault.
(This function will be available soon)
Detail Parameter
Copy Parameter
Keypad Locked
PLC Function
Description
5. Copy PLC
6. Fault Record
7. Simple/ Quick Setting
8. Display Setting
6-26
9. Time Setting
10. Language Setting
11. Startup Menu Setting
12. Main Page Setting