Chapter 13 Troubleshooting
You will lose all of your changes when you push the Reset button.
To reset the MAX208M2W Series,
Make sure the Power LED is on and not blinking.
1
Press and hold the Reset button for five to ten seconds. Release the Reset button
2
when the Power LED begins to blink. The default settings have been restored.
If the MAX208M2W Series restarts automatically, wait for the MAX208M2W Series
to finish restarting, and log in to the web configurator. The password is "1234".
If the MAX208M2W Series does not restart automatically, disconnect and
reconnect the MAX208M2W Series's power. Then, follow the directions above
again.
13.4.1 Pop-up Windows, JavaScript and Java Permissions
Please see
190
Appendix C on page
235.
MAX208M2W Series User's Guide