Table of Contents
Advertisement
Chapter 10 The VoIP Account Screens
10.5 User
Click VoIP > Account 1 (or Account 2) > User to configure advanced VoIP
settings such as DTMF, call forwarding, call waiting and hotline settings.
Figure 70 VoIP > Account 1 (or Account 2) > User
The following table describes the labels in this screen.
Table 53 VoIP > Account 1 (or Account 2) > User
LABEL
SIP Account
Enable
Subscriber
Number
Display Name
Authentication
Name
Password
Codec Settings
150
DESCRIPTION
Select this if you want the MAX208M2W Series to use this account.
Clear it if you do not want the MAX208M2W Series to use this
account.
Enter your SIP number. In the full SIP URI, this is the part before the
@ symbol. You can use up to 127 printable ASCII characters.
Enter the name that appears on the other party's device if they have
Caller ID enabled. You can use up to 127 printable ASCII characters.
Type the SIP user name associated with this account for
authentication to the SIP register server.
This field can be 1-31 printable characters (A-Z, a-z, 0-9).
Type the SIP password associated with this account. This field can be
0-31 printable characters (A-Z, a-z, 0-9), underscores (_), pluses (+),
periods (.), and "at" symbols (@).
MAX208M2W Series User's Guide
Advertisement
Table of Contents
