Table of Contents
Advertisement
Chapter 3 Setup Wizard
Figure 15 Steup Wizard > WLAN Settings > Encryption Type: WPA Personall
The following table describes the labels in this screen.
Table 10 Setup Wizard > WLAN Settings
LABEL
Wifi Settings
Enable WLAN
WLAN Mode
WLAN Channel
SSID Settings
WLAN SSID
Hide SSID
Encryption
Type
SSID WEP Settings
Note: You will only see this options if you selected WEP as the Encryption Type.
Authentication
Method
WEP Encryption
Length
Key 1 - 4
SSID WPA Settings
38
DESCRIPTION
Select this box to enable the wireless service and allow other
wireless clients to connect to the Internet using the MAX208M2W
Series.
Select the mode that the MAX208M2W Series will be using to
communicate: 802.11 B/G/N mixed, 802.11 B/G mixed, 802.11
B only, 802.11 G only, or 802.11 N only.
Select one channel from 1 to 13 for wireless communications
with the wireless stations.
This field dilsplays the name of the wireless network associated with the
MAX208M2W Series.
Select this option if you wish to keep the name of the wireless
network hidden.
Select the type of encryption that the network will be using:
None, WEP, or WPA Personal.
Select the type of authentication used to join the network:
Openn System or Shared Key.
Select the length of the encryption key: 64-bit or 128-bit.
Pick one of four available keys. The key can be in either
Hexagecimal (HEX) or ASCII format.
Type the key using any letters and numbers. The field is case
sensitive and the lenght must match the length picked in the
step above (64-bit or 128-bit). A warning mesage will appear if
you fail to do this.
MAX208M2W Series User's Guide
Advertisement
Table of Contents
