Table of Contents
Advertisement
Chapter 7 Network Setting
Table 42 VLAN
LABEL
Tag
OK
Port Settings
#
PVID Group
Priority
OK
VLAN Rules - You can configure up to 7 VLANs on the MAX208M2W Series. By default,
VLANs 1 to 7 are configured.
#
VID
Port1 / Port 2
Join
Tag
OK
124
DESCRIPTION
This field displays whether to prioritize traffic transmitted by the port,
tagged or untagged. Click this field to change the setting. Set this to
untagged if you do not want to prioritize outgoing traffic through the
port.
Click this to save the changes in the Port Egress Tagging section.
This is the index number of a port (1 or 2).
This field displays the index number of a VLAN rule with which the port
is associated. Click this field to change the setting. Select MGMT to
allow the computer(s) connected to the port to access the MAX208M2W
Series using the LAN IP address (see the
> IP
screen).
Note: Set one port to MGMT so that you can still manage the
MAX208M2W Series through the port. Set both ports to
tagged if you do not need to manage the MAX208M2W
Series any more.
Enter a priority level (1~7) that the MAX208M2W Series assigns to
frames belonging to this VLAN. Enter "0" for no priority assigned.
Click this to save the changes in the Port Settings section.
This is the index number of a VLAN rule.
This field displays the VLAN ID of the VLAN rule. Click this field to
change the VLAN ID. When you make the change, make sure you
configure the same VLAN ID in the Management VLAN section..
This is an indicator of which port is being configured.
Select Y to add the port into the VLAN group. Otherwise, select N.
This field displays the allowed traffic for the port, VLAN-tagged or
VLAN-untagged. Click this field to change the setting.
Click this to save the changes in the VLAN Rules section.
Network Setting > LAN
MAX208M2W Series User's Guide
Advertisement
Table of Contents
