Table of Contents
Advertisement
This screen contains the following fields:
Table 24 PPPoE
LABEL
User Name
Password
Retype
Password
Auth Protocol
MPPE
Encryption
MPPE Stateful
Idle Timeout
AC Name
DNS Overwrite
Connection
Trigger
Connection
Timeout
PPPoE Connect
PPPoE
Disconnect
MAX208M2W Series User's Guide
DESCRIPTION
Enter the username for PPPoE login into the WAN network.
Enter the password for PPPoE login into the WAN network.
Retype the password to confirm it.
Select a PPPoE authentication protocol. The MAX208M2W Series
supports the following:
•
CHAP - The Challenge Handshake Authentication Protocol (CHAP)
uses PPP to authenticate remote devices using a three-way
handshake and shared secret verification.
•
PAP - Password Authentication Protocol uses unencrypted plaintext
to send a passwords for authentication over the network. It's
probably not a good idea to rely on this for security.
•
MS-CHAP v1/2 -This is Microsoft's variant of Challenge Handshake
Authentication Protocol (CHAP). It allows for mutual authentication
between devices.
Use this option to enable or disable authentication through Microsoft
Point-To-Point Encryption (MPPE) protocol.through Microsoft Point-To-
Point Encryption (MPPE) protocol.
Use this option to allow or disallow the MAX208M2W Series to use the
Microsoft Point-To-Point Encryption (MPPE) protocol for stateful peer
negotiation.
Enter the number of second the MAX208M2W Series waits during
authentication before timing out.
Enter the access concentrator name for the PPPoE interface if your ISP
uses an AC PPPoE service.
Use this option to allow or disallow the MAX208M2W Series to overwrite
DNS static DNS entries on client devices.
Set whether the MAX208M2W Series is persistently connected to the
WAN (AlwaysOn) or you must click the PPPoE Connect button each
time you want to get on the WAN (Manual).
Enter in seconds the duration the MAX208M2W Series waits for idle
activity before disconnecting from the WAN.
Click this to connect to the WAN using PPPoE.
Click this to disconnect from the WAN.
Chapter 7 Network Setting
97
Advertisement
Table of Contents
