Chapter 12 Maintenance
If the upload was not successful, you are notified with an error message.
12.16 Factory Defaults
Use this screen to restore the WiMAX Device to its factory default settings.
Click Maintenance > Backup/Restore > Factory Defaults to open this screen
as shown next.
Figure 95 Factory Defaults Screen
This screen contains the following fields:
Table 76 Factory Defaults
LABEL
Reset
12.17 Log Setting
Use this screen to configure which type of events on the WiMAX Device are
logged.
Click Maintenance > LOG > Log Setting to open this screen as shown next.
Figure 96 Log Setting Screen
This screen contains the following fields:
Table 77 Log Setting
LABEL
Enable Log
Log Level
180
DESCRIPTION
Click this to clear all user-entered configuration information and return
the MAX208M2W Series to its factory defaults. There is no warning
screen.
DESCRIPTION
Select this to have the MAX208M2W Series log network activity
according to the selected Log Level.
Select the type of logs to record.
MAX208M2W Series User's Guide