ZyXEL Communications MAX218M2W User Manual page 175

Table 67 CWMP (continued)
LABEL
ACS Password
Perodical
Inform Enable
Periodical
Inform Interval
Connection
Request
Username
Connection
Request
Password
CA Certificate
File
CA Certificate
Info
Client
Certificate File
Client
Certificate Info
MAX208M2W Series User's Guide
DESCRIPTION
Enter the password sent when the MAX208M2W Series connects to an
ACS and which is used for authentication.
You can enter up to 31 alphanumeric characters (a-z, A-Z, 0-9) and
underscores but spaces are not allowed.
Select this to allow the MAX208M2W Series to periodically connect to
the ACS and check for configuration updates.
If you do not enable this feature then the MAX208M2W Series can only
be updated automatically when the ACS initiates contact with it and if
you selected the checkbox on this screen.
Enter the time interval (in seconds) at which the MAX208M2W Series
connects to the auto-configuration server.
Enter the connection request user name that the ACS must send to the
MAX208M2W Series when it requests a connection.
You can enter up to 31 alphanumeric characters (a-z, A-Z, 0-9) and
underscores but spaces are not allowed.
Note: This must be provided by the ACS administrator.
Enter the connection request password that the ACS must send to the
MAX208M2W Series when it requests a connection.
You can enter up to 31 alphanumeric characters (a-z, A-Z, 0-9) and
underscores but spaces are not allowed.
Note: This must be provided by the ACS administrator.
Click Browse to upload a Certificate Authority (CA) certificate to the
MAX208M2W Series.
This displays information about the currently active CA certificate.
Click Browse to upload a client certificate to the MAX208M2W Series.
This displays information about the currently active client certificate.
Chapter 12 Maintenance
171