Table of Contents
Advertisement
Chapter 12 Maintenance
Remote Management and NAT
When NAT is enabled:
• Use the MAX208M2W Series's WAN IP address when configuring from the WAN.
• Use the MAX208M2W Series's LAN IP address when configuring from the LAN.
System Timeout
There is a default system management idle timeout of five minutes. The
MAX208M2W Series automatically logs you out if the management session
remains idle for longer than this timeout period. The management session does
not time out when a statistics screen is polling.
SNMP
Simple Network Management Protocol (SNMP) is a protocol used for exchanging
management information between network devices. SNMP is a member of the
TCP/IP protocol suite. Your MAX208M2W Series supports SNMP agent
functionality, which allows a manager station to manage and monitor the
MAX208M2W Series through the network. The MAX208M2W Series supports SNMP
version one (SNMPv1) and version two (SNMPv2). The next figure illustrates an
SNMP management operation.
Note: SNMP is only available if TCP/IP is configured.
160
MAX208M2W Series User's Guide
Advertisement
Table of Contents
