Table of Contents
Advertisement
Chapter 14 Product Specifications
Table 85 Firmware Specifications (continued)
FEATURE
Logging
Codecs
Fax Support
Ring Tones
Call Prioritization
Table 86 Standards Supported
STANDARD
RFC 768
RFC 791
RFC 792
RFC 792
RFC 826
RFC 854
RFC 1112
RFC 1349
RFC 1706
RFC 1889
RFC 1890
RFC 2030
RFC 2104
RFC 2236
RFC 2131
RFC 2401
RFC 2409
RFC 2475
RFC 2543
RFC 2617
RFC 2782
RFC 2833
RFC 2976
RFC 3261
RFC 3262
194
DESCRIPTION
Use the MAX208M2W Series's logging feature to view
connection history, surveillance logs, and error messages.
G.711 (PCM
-law and
µ
T.38 FAX relay (FAX over UDP).
G.711 fax relay for fax calls and be able to renegotiate codec
to G.711 if a fax call is detected.
Supports different distinctive ring tones on each line.
Prioritize VoIP traffic originating from the RJ-11 ports over
any other traffic.
DESCRIPTION
User Datagram Protocol
Internet Protocol v4
Internet Control Message Protocol
Transmission Control Protocol
Address Resolution Protocol
Telnet Protocol
IGMPv2
Type of Service Protocol
DNS NSAP Resource Records
Real-time Transport Protocol (RTP)
Real-time Transport Control Protocol (RTCP)
Simple Network Time Protocol
HMAC: Keyed-Hashing for Message Authentication
IGMPv2
Dynamic Host Configuration Protocol
Security Architecture for the Internet Protocol
Internet Key Exchange
Architecture for Differentiated Services (Diffserv)
SIP Protocol
Hypertext Transfer Protocol (HTTP) Authentication: Basic and
Digest Access Authentication
A DNS RR for specifying the location of services (DNS SRV)
Real-time Transport Protocol Payload for DTMF Digits, Telephony
Tones and Telephony Signals
The SIP INFO Method
Session Initiation Protocol (SIP version 2)
Reliability of Provisional Responses in the Session Initiation
Protocol (SIP).
-law), G729, G.729a
a
MAX208M2W Series User's Guide
Advertisement
Table of Contents
