Chapter 4 Tutorials
Click Network Setting > WAN. Change the MAX208M2W Series to bridge mode
5
and then click Save.
The MAX208M2W Series will restart. Wait until it completely restarts.
6
Configure the IP address of your computer to be in the same network as the
7
MAX208M2W Series's LAN. The default is 192.168.1.x where x can be 2 to 254.
Open a browser and type the MAX208M2W Series's LAN IP address (for example,
8
192.168.1.1).
Log into the MAX208M2W Series and then click Network Setting > VLAN.
9
10 Enable VLAN and create VLAN 100 by entering VLAN 100 and the priority (7 in this
example) in the Management VLAN section. The MAX208M2W Series requires to
reboot again.
11 After it completely restarts, log into the MAX208M2W Series. Click Network
Setting > VLAN.
58
MAX208M2W Series User's Guide