Table of Contents
Advertisement
This screen contains the following fields:
Table 33 Static Route
LABEL
Destination IP
Subnet Mask
Next Hop
Metric
7.13 RIP
Use these settings to configure how the WiMAX Device exchanges information with
other routers.
Click Network Setting > Route > RIP to open this screen as shown next.
Figure 46 RIP Screen
MAX208M2W Series User's Guide
DESCRIPTION
Enter the destination IP address of the static route.
Enter the subnet mask of the static route.
Select Interface and then select WAN or LAN for the next hop of the
static route.
If the next hop is an IP address rather than an interface on the
MAX208M2W Series, select IP Address and enter the IP address.
Enter the static route metric.
Chapter 7 Network Setting
107
Advertisement
Table of Contents
