Chapter 13 Troubleshooting
Inspect your cables for damage. Contact the vendor to replace any damaged
3
cables.
Disconnect and re-connect the power adapter to the MAX208M2W Series.
4
If the problem continues, contact the vendor.
5
13.2 MAX208M2W Series Access and Login
I forgot the IP address for the MAX208M2W Series.
The default IP address is .
1
If you changed the IP address and have forgotten it, you might get the IP address
2
of the MAX208M2W Series by looking up the IP address of the default gateway for
your computer. To do this in most Windows computers, click Start > Run, enter
cmd, and then enter ipconfig. The IP address of the Default Gateway might be
the IP address of the MAX208M2W Series (it depends on the network), so enter
this IP address in your Internet browser.
If this does not work, you have to reset the MAX208M2W Series to its factory
3
defaults. See
I forgot the password.
The default password is 1234.
1
If this does not work, you have to reset the MAX208M2W Series to its factory
2
defaults. See
I cannot see or access the Login screen in the web configurator.
Make sure you are using the correct IP address.
1
• The default IP address is .
• If you changed the IP address
address.
186
Section 12.16 on page
Section 12.16 on page
(Section 7.6 on page
180.
180.
99), use the new IP
MAX208M2W Series User's Guide