ZyXEL Communications MAX218M2W User Manual page 37

The following table describes the labels in this screen.
Table 8 Setup Wizard > WiMAX Authentication Settings
LABEL
Authentication
Authenticati
on Mode
EAP Supplication
EAP Mode
Anonymous
Id
Ignore Cert
Verification
Server Root
CA Cert.
File
Server Root
CA Cert.
Info
Device
Cert. File
Device
Cert. Info.
Device
Private Key
Device
Private Key
Info
Device
Private Key
Password
Inner Mode
Username
Password
Back
Next
MAX208M2W Series User's Guide
DESCRIPTION
Select a WiMAX authentication mode for authentication network
sessions with the ISP. Options are:
• No authentication
• User authentication
• Device authentication
• User and Device authentication
Select an EAP autentication mode. See
more inforamtion.
Enter your anonymous ID.
Note: Some modes may not require this.
Select this to ignore base station certification verification when a
certificate is received during EAP-TLS or EAP-TTLS.
Browse for and choose a server root certificate file, if required.
This field displays information about the assigned server root certificate.
Browse for and choose a device certificate file, if required.
This field displays information about the assigned device certificate.
Browse for and choose a device private key, if required.
This field displays information about the assigned device private key.
Enter the device private key, if required.
Select an inner authentication mode (MS-CHAP, MS-CHAPV2, CHAP,
MD5, PAP. See Table 15 on page 77
Enter your authentication username.
Enter your authentication password.
Click to display the previous screen.
Click to proceed to the next screen.
Chapter 3 Setup Wizard
Table 15 on page 77
if you need more inforamtion.
if you need
35