12.12 Upgrade Link
Use this screen to set the URL of a firmware file on a remote computer and upload
it to the WiMAX Device.
Click Maintenance > Firmware Upgrade > Upgrade Link to open this screen
as shown next.
Figure 91 Upgrade Link Screen
This screen contains the following fields:
Table 72 Upgrade Link
LABEL
Upgrade Link
Upgrade
12.13 CWMP Upgrade
Use this screen to upgrade the firmware on the WiMAX Device using CWMP
Request Download.
Click Maintenance > Firmware Upgrade > CWMP Upgrade to open this
screen as shown next.
Figure 92 CWMP Upgrade Screen
MAX208M2W Series User's Guide
DESCRIPTION
Enter the URL or IP address of the firmware's upgrade location on the
network.
Click this to begin uploading the selected file. This may take up to two
minutes.
Note: Do not turn off the device while firmware upload is in
progress!
Chapter 12 Maintenance
177