Chapter 7 Network Setting
Table 43 DDNS (continued)
LABEL
Backup MX
MX Host
7.21 Content Filter
Use these settings to allow ("whitelist") or block ("blacklist") connections to and
from specific web sites through the WiMAX Device.
Click Network Setting > Content Filter to open this screen as shown next.
Figure 57 Content Filter Screen
This screen contains the following fields:
Table 44 Content Filter
LABEL
URL List
Enable URL
Filter
Blacklist/
Whitelist
URL Filter Rule
Active
URL
Delete
Add
OK
126
DESCRIPTION
Select this to enable a secondary mail routing, if supported by the
specified DYNDNS service provider.
Enter the host to which mail is routed when the MX option is selected.
DESCRIPTION
Select this employ the content filter to allow ("whitelist") or block
("blacklist") specific URL connections made through the MAX208M2W
Series.
Select whether the current filtering applies to the blacklist (sites that
are blocked) or the whitelist (sites that are allowed).
Indicates whether the current URL filter is active or not.
Indicates the URL to be filtered according to blacklist or whitelist rules.
Click this to delete a specified rule.
Click this to add a new filter rule.
Click this to save any changes made to the list.
MAX208M2W Series User's Guide