Table of Contents
Advertisement
Click Network Setting > VLAN to open the screen as shown next.
Figure 55 VLAN Screen
This screen contains the following fields:
Table 42 VLAN
LABEL
Management VLAN
VLAN ID
Priority
Port Egress Tagging
#
MAX208M2W Series User's Guide
DESCRIPTION
Enter an ID number (1~4094) to create a new VLAN. Enter 0 to disable
VLAN on the MAX208M2W Series.
Note: To use VLAN on the MAX208M2W Series, you must switch
the operation mode to "bridge" on the
WAN
screen. It will then require system restart to take effect.
Enter a priority level (1~7) that the MAX208M2W Series assigns to
frames belonging to this VLAN. Enter "0" for no priority assigned.
This is the index number of a port (1 or 2).
Chapter 7 Network Setting
Network Setting >
123
Advertisement
Table of Contents
