Chapter 4 Tutorials
Connect your computers to the MAX208M2W Series's Ethernet ports and you're all
8
set!
Note: You may need to configure the computers on your LAN to automatically obtain
IP addresses. For information on how to do this, see
Once your network is configured and hooked up, you will want to connect it to the
Internet next. To do this, just run the Internet Connection Wizard
on page
29), which walks you through the process.
4.4 Changing Certificate
This tutorial shows you how to import a new security certificate, which allows your
device to communicate with another network servers.
Goal: Import a new security certificate into the MAX208M2W Series.
See Also:
Go to the WiMAX > Profile > Authentication Settings screen. In the EAP
1
Supplicant section, click each Browse button and locate the security certificates
that were provided by your new ISP.
s
Configure your new Internet access settings based on the information provided by
2
the ISP.
Note: You can also use the Internet Connection Wizard to configure the Internet
access settings.
44
Appendix E on page
257.
Appendix B on page
(Chapter 3
MAX208M2W Series User's Guide
207.