Table of Contents
Advertisement
Chapter 17 Tools
After you see a "configuration upload successful" screen, you must then wait one minute before
logging into the NBG-418N again.
Figure 99 Configuration Restore Successful
The NBG-418N automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 100 Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default NBG-418N IP address (192.168.1.1 in
router mode). See
If the upload was not successful, the following screen will appear. Click Return to go back to the
Configuration screen.
Figure 101 Configuration Restore Error
17.4.3 Back to Factory Defaults
Pressing the Reset button in this section clears all user-entered configuration information and
returns the NBG-418N to its factory defaults.
You can also press the RESET button on the rear panel to reset the factory defaults of your NBG-
418N. Refer to
17.5 Restart Screen
System restart allows you to reboot the NBG-418N without turning the power off.
134
Appendix C on page 167
Section 2.3.1 on page 19
for details on how to set up your computer's IP address.
for more information on the RESET button.
Advertisement
Table of Contents
