20-4 WAN and Dial Backup Setup
Table 20-2 Menu 2: Dial Backup Setup
FIELD
Edit Advanced
To edit the advanced setup for the Dial Backup port, move the cursor to
Setup
this field; press the [SPACE BAR] to select Yes and then press
[ENTER] to go to Menu 2.1: Advanced Setup.
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to save
your configuration, or press [ESC] at any time to cancel.
Advanced WAN Setup
20.5
Consult the manual of your WAN device connected to your Dial Backup port for
To edit the advanced setup for the Dial Backup port, move the cursor to the Edit Advanced Setup
field in
Menu 2 - WAN Setup, press the [SPACE BAR] to select Yes and then press [ENTER].
Figure 20-3 Menu 2.1 Advanced WAN Setup
Menu 2.1 - Advanced WAN Setup
AT Command Strings:
Dial= atdt
Drop= ~~+++~~ath
Answer= ata
Drop DTR When Hang Up= Yes
AT Response Strings:
CLID= NMBR =
Called Id=
Speed= CONNECT
The following table describes fields in this menu.
317517-A Rev 00
DESCRIPTION
specific AT commands.
Call Control:
Dial Timeout(sec)= 60
Retry Count= 0
Retry Interval(sec)= N/A
Drop Timeout(sec)= 20
Call Back Delay(sec)= 15
EXAMPLE
Yes