27-4 Filter Configuration
You can apply up to four filter sets to a particular port to block multiple types of packets. With
each filter set having up to six rules, you can have a maximum of 24 rules active for a single port.
Configuring a Filter Set
27.2
The Contivity 221 includes filtering for NetBIOS over TCP/IP packets by default. To configure
another filter set, follow the procedure below.
Step 1.
Enter 21 in the main menu to open menu 21.
Figure 27-4 Menu 21: Filter and Firewall Setup
Menu 21 - Filter and Firewall Setup
1. Filter Setup
2. Firewall Setup
Step 2.
Enter 1 to bring up the following menu.
Figure 27-5 Menu 21.1: Filter Set Configuration
Menu 21.1 - Filter Set Configuration
Filter
Set #
Comments
------
-----------------
1
_______________
2
_______________
3
_______________
4
_______________
5
_______________
6
_______________
Enter Filter Set Number to Configure= 0
Edit Comments= N/A
Press ENTER to Confirm or ESC to Cancel:
Select the filter set you wish to configure (1-12) and press [ENTER]
Step 3.
Enter a descriptive name or comment in the Edit Comments field and press [ENTER].
Step 4.
3317517-A Rev 00
Enter Menu Selection Number:
Filter
Set #
Comments
------
-----------------
7
_______________
8
_______________
9
_______________
10
_______________
11
_______________
12
_______________
.