Table of Contents
Advertisement
25-6 NAT
Table 25-2 SUA Address Mapping Rules
FIELD
Set Name
This is the name of the set you selected in menu 15.1 or enter the
name of a new set you want to create.
Idx
This is the index or rule number.
Local Start IP
Local Start IP is the starting local IP address (ILA).
Local End IP
Local End IP is the ending local IP address (ILA). If the rule is for all
local IPs, then the start IP is 0.0.0.0 and the end IP is 255.255.255.255.
Global Start
This is the starting global IP address (IGA). If you have a dynamic IP,
IP
enter 0.0.0.0 as the Global Start IP.
Global End IP
This is the ending global IP address (IGA).
Type
These are the mapping types discussed above. Server allows us to
specify multiple servers of different types behind NAT to this machine.
See later for some examples.
Once you have finished configuring a rule in this menu, press [ENTER] at the message "Press ENTER to
Confirm..." to save your configuration, or press [ESC] to cancel.
User-Defined Address Mapping Sets
Now look at option 1 in menu 15.1. Enter 1 to bring up this menu. Look at the differences from
the previous menu. Note the extra Action and Select Rule fields mean you can configure rules in
this screen. Note also that the [?] in the Set Name field means that this is a required field and you
must enter a name for the set.
The entire set will be deleted if you leave the Set Name field blank and press
317517-A Rev 00
Menu 15.1.255 is read-only.
DESCRIPTION
[ENTER] at the bottom of the screen.
EXAMPLE
SUA
1
0.0.0.0
255.255.255.255
0.0.0.0
Server
Advertisement
Table of Contents
