Table of Contents
Advertisement
23-10 Remote Node Setup
Table 23-4 Remote Node Network Layer Options Menu Fields
FIELD
Private
This field is valid only for PPTP/PPPoE encapsulation. This parameter
determines if the Contivity 221 will include the route to this remote node
in its RIP broadcasts. If set to Yes, this route is kept private and not
included in RIP broadcast. If No, the route to this remote node will be
propagated to other hosts through RIP broadcasts.
RIP Direction
Press [SPACE BAR] and then [ENTER] to select the RIP direction from
Both/ None/In Only/Out Only. See the LAN Setup chapter for more
information on RIP. The default for RIP on the WAN side is None. It is
recommended that you do not change this setting.
Version
Press [SPACE BAR] and then [ENTER] to select the RIP version from
RIP-1/RIP-2B/RIP-2M or None.
Multicast
IGMP (Internet Group Multicast Protocol) is a network-layer protocol
used to establish membership in a Multicast group. The Contivity 221
supports both IGMP version 1 (IGMP-v1) and version 2 (IGMP-v2).
Press [SPACE BAR] to enable IP Multicasting or select None to disable
it. See the LAN Setup chapter for more information on this feature.
Once you have completed filling in Menu 11.3 Remote Node Network Layer Options, press [ENTER]
at the message "Press ENTER to Confirm..." to save your configuration and return to menu 11, or press
[ESC] at any time to cancel.
Remote Node Filter
23.5
Move the cursor to the field Edit Filter Sets in menu 11.1, and then press [SPACE BAR] to set
the value to Yes. Press [ENTER] to open
Use menu 11.5 to specify the filter set(s) to apply to the incoming and outgoing traffic between
this remote node and the Contivity 221 to prevent certain packets from triggering calls. You can
specify up to 4 filter sets separated by commas, for example, 1, 5, 9, 12, in each filter field. Note
that spaces are accepted in this field. For more information on defining the filters, please refer to
the Filters chapter. For PPPoE or PPTP encapsulation, you have the additional option of
specifying remote node call filter sets.
317517-A Rev 00
DESCRIPTION
Menu 11.5 - Remote Node Filter
EXAMPLE
No
None
(default)
N/A
None
(default)
.
Advertisement
Table of Contents
