Figure 29-2 Menu 24.1: System Maintenance: Status; Table 29-1 System Maintenance: Status Menu Fields - Nortel Contivity 221 User Manual

29-2 System Information and Diagnosis
Step 1. Enter number 24 to go to Menu 24 - System Maintenance.
Step 2.
In this menu, enter 1 to open System Maintenance - Status.
Step 3.
There are three commands in Menu 24.1 - System Maintenance - Status. Entering 1 drops the
WAN connection, 9 resets the counters and [ESC] takes you back to the previous screen.

Figure 29-2 Menu 24.1: System Maintenance: Status

Menu 24.1 - System Maintenance - Status
Port Status TxPkts
WAN Down
LAN Down
Port Ethernet Address
WAN 00:a0:c5:01:23:46
LAN 00:a0:c5:01:23:45
System up Time:
Name:
Routing: IP
RAS F/W Version: V02.001 | 08/01/2003
COMMANDS: 1-Drop WAN 9-Reset Counters
The following table describes the fields present in Menu 24.1 - System Maintenance - Status.
These fields are READ-ONLY and meant for diagnostic purposes. The upper right corner of the
screen shows the time and date according to the format you set in menu 24.10.

Table 29-1 System Maintenance: Status Menu Fields

FIELD
Port Identifies a port (WAN, or LAN) on the Contivity 221.
Status Shows the port speed and duplex setting if you're using Ethernet Encapsulation
and Down (line is down), idle (line (ppp) idle), dial (starting to trigger a call) and
drop (dropping a call) if you're using PPPoE Encapsulation.
TxPkts The number of transmitted packets on this port.
317517-A Rev 00
RxPkts Cols Tx B/s
0 0 0
463 792 0
IP Address
0.0.0.0
192.168.1.1 255.255.255.0
3:06:20
Press Command:
DESCRIPTION
03:06:17
Sat. Jan. 01, 2000
Rx B/s Up Time
0 0 0:00:00
0 0 0:00:00
IP Mask DHCP
0.0.0.0 Client
Server
ESC-Exit