Nortel Contivity 221 User Manual page 527

I-18 Command Interpreter
Chart I-5
IPSec Commands
COMMAND
lcIdContent
myIpAddr
peerIdType
peerIdContent
secureGwAddr
ike
317517-A Rev 00
<string> Sets the local ID content.
<IP address> Sets the my IP address.
<0:IP | 1:DNS | 2:Email> Sets the peer ID type.
<string> Sets the peer ID content.
<IP address | Domain Sets the secure gateway IP address or domain
name> name.
negotiationMode Sets the IKE phase 1 negotiation mode.
<0:Main | 1:Aggressive>
preShareKey <string> Sets the IKE phase 1 pre-shared key.
p1EncryAlgo <0:DES | Sets the IKE phase 1 encryption algorithm.
1:3DES>
p1AuthAlgo <0:MD5 | Sets the IKE phase 1 authentication algorithm.
1:SHA1>
p1SaLifeTime Sets the IKE phase 1 SA life time.
<seconds>
p1KeyGroup <0:DH1 | Sets the IKE phase 1 key group.
1:DH2>
activeProtocol <0:AH | Sets the IKE phase 2 active protocol.
1:ESP>
p2EncryAlgo <0:Null | Sets the IKE phase 2 encryption algorithm.
1:DES | 2:3DES>
p2AuthAlgo <0:MD5 | Sets the IKE phase 2 authentication algorithm.
1:SHA1>
p2SaLifeTime Sets the IKE phase 2 SA lifetime.
<seconds>
encap <0:Tunnel | Sets the IKE phase 2 encapsulation.
1:Transport>
pfs <0:None | 1:DH1 | Sets the IKE phase 2 perfect forward secret.
2:DH2>
DESCRIPTION