Table of Contents
Advertisement
Table 25-5 Menu 15.3: Trigger Port Setup Description
FIELD
End Port
Enter a port number or the ending port number in a range of port numbers.
Trigger
The trigger port is a port (or a range of ports) that causes (or triggers) the Contivity 221 to
record the IP address of the LAN computer that sent the traffic to a server on the WAN.
Start Port
Enter a port number or the starting port number in a range of port numbers.
End Port
Enter a port number or the ending port number in a range of port numbers.
Press [ENTER] at the message "Press ENTER to Confirm..." to save your configuration, or press [ESC]
at any time to cancel.
DESCRIPTION
Contivity 221 VPN Switch User's Guide
NAT 25-21
EXAMPLE
7170
7070
7070
Advertisement
Table of Contents
